Siemens SICAM Q80 Operating Instruction page 29

Power quality recorder

Hide thumbs Also See for SICAM Q80:

Table of Contents

Assembly, Commissioning, Parameterization

E-29

Selection of TCP/IP or NetBEUI devices

Activate the protocol which uses the measurement device and confirm your choice with OK. In the Add Device

Interface dialog, a search is then performed for all devices in the PC's address space once you push the "Network

search" button. Subsequently, the measurement devices appear in the list:

Available devices

Select your measurement device and confirm your selection with OK. The measurement device is then available for

your measurements. In the Device selection window, the available devices not yet involved in any measurement task

are listed on the left side. In order to use them for an measurement task, click on the button Add. In order to check a

device's properties, highlight its entry and then click on the button Properties.

Power Quality Recorder SICAM Q80 7KG8080, Operating instruction

E50417-B1074-C419-A2, Release 12.01.2015

Table of Contents