Siemens SICAM Q80 Operating Instruction page 25

Power quality recorder

Hide thumbs Also See for SICAM Q80:

Table of Contents

Assembly, Commissioning, Parameterization

E-25

Right click to LAN, than open properties

Settings in Windows for TCP/IP

If no IP-address is entered in the Properties page for the TCP/IP-connection ("Obtain IP-address automatically"), you

can determine the current IP-address using the Command Prompt. Note, however, that automatically obtained IP-

addresses are only valid until the next time the operating system is started! Start the Command Prompt via the

Windows Start menu by selecting Programs : Accessories: Command Prompt and then enter Ipconfig or ipconfig /all

for more detailed information:

Result of the command "ipconfig"

Power Quality Recorder SICAM Q80 7KG8080, Operating instruction

E50417-B1074-C419-A2, Release 12.01.2015

Table of Contents