Storage And Transporting - Siemens SICAM Q80 Operating Instruction

Power quality recorder

Hide thumbs Also See for SICAM Q80:

Table of Contents

Storage and Transporting

Transporting

14.1

When transporting the SICAM Q80 7KG8080 unit, always use the original packaging or appropriate packaging which

protects the device against knocks and jolts. Above all, never let the unit fall. If transport damages occur, please be

sure to contact the customer service. Damage arising from transporting is not covered in the manufacturer's

guarantee.

Possible damage due to condensation can be limited by wrapping the device in plastic sheeting. For more on this

topic, see the notes under

14.2

Storage

Store the device in dry, clean locations. The storage temperature range for the device and associated components is -

40 °C through 90 °C.

The relative humidity may not be high enough to cause formation of either condensation or frost.

We recommend a limited temperature range of +10 °C to +35 °C for storage purposes in order to avoid premature

aging of the electrolyte capacitors.

Additionally, if the device is to be stored for longer periods, it is recommended to connect it once a year to a power

supply for one or two days in order to prime its electrolyte capacitors. The same procedure should be applied prior to

using the device after any long storage time.

Before starting

Storage and Transporting

Power Quality Recorder SICAM Q80 7KG8080, Operating instruction

E50417-B1074-C419-A2, Release 12.01.2015

E-67

Table of Contents