Electrolux EOK66030 User Manual page 28

Hide thumbs Also See for EOK66030:
Table of Contents

Advertisement

28 electrolux
The outside of the appliance
• Wipe down the front of the appliance with
a soft cloth and a solution of hot water and
washing-up liquid.
• For metal fronts, use normal commercially
available cleaning agents.
• Please do not use any scouring agents or
abrasive sponges.
Oven interior
Clean the oven after every use. This is the
easiest way to remove dirt which then cannot
burn on.
1. When the oven door is opened, the oven
light switches itself on automatically.
2. Wipe out the oven after every use with a
solution of washing-up liquid and then dry
it.
Remove stubborn dirt with special oven
cleaners.
Important! When using oven sprays, please
follow the manufacturer's instructions
exactly!
Oven roof with catalytic self-cleaning
surface
(rough, porous surface)
The oven roof has a catalytic self-cleaning
surface, from which small food deposits are
burnt off at temperatures over 200 °C.
Please observe the following instructions to
ensure the best working of this self-cleaning
surface.
Caution! Do not use cleaning agents,
oven sprays or steel wool that may
scratch or scour the surface. Do not use
soap or other detergents. These destroy
the catalytic self-cleaning surface of the
oven roof. If any residues remain, wipe
them off with a damp, soft sponge.
It is best for the catalytic self-cleaning
surface that the oven is only opened for
short periods.
Caution! Do not use cloths made of
fabric. The lint catches and sticks on the
rough surface.
Accessories
Wash up all insertable parts (oven shelf, bak-
ing tray, side rails, etc.) after each use and
dry well. For easier cleaning, leave to soak for
a while.
Shelf Support Rails
The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the
oven wall (1) and then unhitch at the back (2).
2
1
Fitting the shelf support rails
Important! The rounded ends of the
guide rails must be pointing forwards!

Advertisement

Table of Contents
loading

Table of Contents