FujiFilm Revoria Press E1136 Reference Manual page 68

4. Remove the jammed staples.
5. Insert the Staple Cartridge into the original position.
Hold the handle and lightly press it up until you hear a click.
Note
Align the "" marks.
6. Push in the Booklet Maker [3].
7. Close the cover.
When Staple Cartridge Comes off
If the Staple Cartridge comes off from the unit due to fall during operation, etc., perform the fol-
lowing steps.
Please be very careful not to hurt your fingers, etc. when removing the deformed staples.
Note
Perform the same steps as well when the Staple Cartridge is separated from the unit.
1. Open the cover of the unit and remove all the de-
formed staples.
2. Move the handle on the rear side of the unit in the
arrow direction..
68
Optional Units
Caution