Table of Contents
Advertisement
(11) Slide out the tray 4 and remove the protective
tape and protective material.
(12) Remove the desiccant and the locking screw
from the tray 4.
(13) Remove the four locking screws.
(14) Attach the three supplied caps.
(15) Attach the supplied scanner cover. (One sup-
plied screw A and one cap)
(16) Remove the protective sheet.
(17) Secure the DF cable with the supplied cable
clamp (large) over as shown in the illustration.
(One supplied screw B)
E-11
Advertisement
Table of Contents
