Horizon Fitness CE4.1 User Manual page 8

A S SE MB LY ST E P 2
A) Open HARDWARE BAG FOR STEP 2.
B) Carefully pull the CONSOLE CABLE through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
C) Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT
WASHERS (C).
D) Attach the TOP FRONT COVER, followed by the TOP BACK COVER and snap them together.
E) Slide CONSOLE MAST BOOT down to seal the console mast hole.
HARDWARE BAG FOR STEP 2 CONTENTS :
8
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
TOP FRONT COVER
MAIN FRAME
BOLT (A)
20 mm
Qty: 4
CONSOLE MAST
CONSOLE MAST BOOT
CONSOLE WIRE
SPRING WASHER (B)
18 mm
Qty: 4
TOP BACK COVER
FLAT WASHER (C)
20 mm
Qty: 4