Horizon Fitness CE4.1 User Manual page 12

A S SE MB LY ST E P 5
HARDWARE BAG FOR STEP 5 CONTENTS :
A S SE MB LY ST E P 6
CONSOLE
CONSOLE MAST
Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect
ADAPTOR to a power outlet. After a "beep", the CONSOLE will light up.
Y O U ' RE F I N I S HE D!
12
( CO NT IN UED )
NUT (K)
INSIDE DIAMETER:
8 mm
Qty: 2
CONSOLE WIRES
BACK
HANDLEBAR
COVER
BOLT (J)
60 mm
Qty: 2
TEFLON WASHER (I)
28.4 mm
Qty: 4
NOTE: There is NO hardware bag for this step.
All hardware is pre-installed.
A) Snap the front and back HANDLEBAR
COVERS together onto the UPPER HANDLE
BARS.
Note the position of the snap tabs on the
covers before snapping into position.
PRE-ATTACHED
SCREWS
B) Attach the CONSOLE WIRES to the
FRONT
HANDLEBAR CONSOLE.
COVER
C) Carefully tuck the CONSOLE MAST wires
into the CONSOLE MAST before attaching
the CONSOLE.
D) Attach CONSOLE to the CONSOLE MAST
using the 4 PRE-ATTACHED SCREWS
(screws will have to be removed from the
console first).
DO NOT PINCH WIRES!
SPACER (H)
44 mm
Qty: 2
SCREW (L)
Qty: 2