Polaris Outlaw 110 2022 Owner's Manual page 140

MAINTENANCE
DRIVE CHAIN SLACK
1. Check the amount of chain slack by moving
the vehicle slightly forward to gain slack at the
top side of the chain.
2. Collapse the suspension with an adjustable
(buckle type) trailer tiedown strap. Fasten the
strap around the axle and rear bumper tube.
3. Tighten the strap until a straight line can be
drawn from the rear axle to the gearcase
output shaft intersecting the swing arm pivot.
This establishes the tightest chain position.
4. Pull down on the chain tensioner
out of the way, then measure chain slack. It
should have 1/4"-1/2" (6-12 mm) deflection.
5. If the chain needs adjustment, use the
procedure cited below.
138
q
to move it