Polaris Outlaw 110 2022 Owner's Manual page 137

Severe injury or death can result from improper
toe alignment and adjustment. Do not attempt
to adjust tie rod alignment. All tie rod
adjustments should be performed by an
authorized POLARIS dealer or other qualified
service facility.
1. Position the vehicle on a level surface.
2. Place the handlebars in a straight-ahead
position.
3. Tie a length of string between two stands.
Position the stands so that the string is flush
with the side of the rear tire. If available, you
may use a long straightedge instead of string.
WARNING
4. Measure the distance from the string to the
rim at the front (1) and rear (2) of the front rim.
The rear measurement should be 1/16"-1/8"
(2-3 mm) more than the front measurement
on each side of the vehicle to obtain the
recommended 1/8" to 1/4" (3-6 mm) toe out
alignment.
5. Repeat the measurement procedure on the
other side of the vehicle.
6. If you discover improper alignment, see your
POLARIS dealer for service.
STEERING INSPECTION
Check the steering assembly periodically for
loose nuts and bolts. If loose nuts and bolts are
found, see your POLARIS dealer or other
qualified service facility before operating the
vehicle.
MAINTENANCE
135