Greenlee Cam Track 881 Instruction Manual page 13

Assembly and Operation Instructions
881 and 881CT with 1813 Bending Table (cont'd)
START
17. Insert the follow bar into the bender with the end
marked START, as shown.
18. Support the rear of the follow bar on the pipe
vise unit.
Greenlee Tools, Inc.
881 and 881CT Hydraulic Benders
19 and 20. Insert the ram positioner (33).
21. Attach the hydraulic fitting unit (29) to the ram, and
connect the hose to the fitting unit. Set the cylinder
and yoke unit on the follow bar. Rotate the pump
control lever counterclockwise.
13
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070