10.14. Disassembly of Bluetooth Mod-
ule P.C.B.
• Refer to "Disassembly of Rear Cabinet Assy".
• Refer to "Disassembly of CD Mechanism".
Step 1 Lift up the Ferrite Core taped on the Bluetooth Shield.
Caution: During assembling, paste the Ferrite Core onto
the Bluetooth Shield, replace the double sided tape if torn.
Step 2 Detach 12P FFC at the connector (CN901) on Bluetooth
Module P.C.B..
Step 3 Remove 2 screws.
Step 4 Remove the Bluetooth Module P.C.B..
Caution: During assembling, ensure that the Bluetooth
Module P.C.B. is properly located and fully seated onto the
Unit.
52