11 Service Position (SL-NE5)
Note: For description of the disassembly procedures, see the Section 10.
11.1. Checking of Panel P.C.B.
Step 1 Remove the Rear Cabinet Assy.
Step 2 Connect 6P FFC at the connector (CN51001) on Main
P.C.B..
Step 3 Check the Panel P.C.B. according to the diagram
shown.
11.2. Checking of SMPS P.C.B.
Step 1 Remove the Rear Cabinet Assy.
Step 2 Connect 6P FFC at the connector (CN51001) on Main
P.C.B..
Step 3 Check the SMPS P.C.B. according to the diagram
shown.
62