13.13. Disassembly of Front Panel
Block
• Refer to "Disassembly of Inner Cover Unit".
Step 1 Detach 2P Wire at the connector (CN54001) on SPK
Main P.C.B..
Step 2 Detach 2P Wire at the connector (CN54002) on SPK
Main P.C.B..
Step 3 Lift up the AirPlay Wire Antenna from the slot.
Caution: During assembling, ensure AirPlay Wire Antenna
is properly insert in the slot.
Step 4 Remove 4 screws.
Step 5 Release 5 catches.
Step 6 Remove the Front Panel Block as arrow shown.
Caution: During assembling, ensure that the (SP1 and SP2)
2P Wire are dressed into the ribs and slot as shown.
81