Bluetooth ® Connection; About Bluetooth; Troubleshooting - Panasonic SC-HTB01 Basic Owner's Manual

Bluetooth connection
®
By using the Bluetooth
to the sound from the Bluetooth
from this system wirelessly.
• Refer to the operating instructions of the Bluetooth
for further instruction on how to connect a Bluetooth
Preparation
• Turn on the Bluetooth
®
place the device near this system.
Bluetooth pairing
®
1
Press [ ] to select " ".
• If the " " indicator flashes quickly, go to step 3.
2
Press and hold [ ] until the " "
indicator flashes quickly.
• If the " " indicator flashes slowly, repeat step
2.
3
Select "SOUNDSLAYER" from the
Bluetooth device's Bluetooth
®
• If prompted for the passkey on the Bluetooth
device, enter "0000".
• Once the Bluetooth
" " indicator stops flashing and lights up.
• You can register up to 8 devices with this system. If a 9th
device is paired, the device that has not been used for the
longest time will be replaced.
Connecting a paired Bluetooth
device
1
Press [ ] to select " ".
• If the " " indicator lights, a Bluetooth
already connected with this system. Disconnect
it. ( below)
2
Select "SOUNDSLAYER" from the
Bluetooth device's Bluetooth
®
∫ Disconnecting a Bluetooth
Press and hold [ ] until the "
• This system can only be connected to one device at a time.
8
TQBS0397
connection, you can listen
®
audio device
®
device
®
®
feature of the device and
menu.
®
device is connected, the
®
®
device is
®
menu.
®
device
®
" indicator flashes.

About Bluetooth

Panasonic bears no responsibility for data and/or information
that is compromised during a wireless transmission.
∫ Frequency band used
device.
This system uses the 2.4 GHz frequency band.
∫ Certification of this device
• This system conforms to frequency restrictions and has
received certification based on frequency laws. Thus, a
wireless permit is not necessary.
• The action below are punishable by law in some countries:
– Taking apart or modifying the unit.
– Removing specification indications.
∫ Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth SIG, Inc.
• Depending on the specifications and settings of a device, it
can fail to connect or some operations can be different.
• This system supports Bluetooth
depending on the operating environment and/or settings,
this security is possibly not sufficient. Transmit data
wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
∫ Range of use
®
Use this device at a maximum range of 10 m (33 ft).
The range can decrease depending on the environment,
obstacles or interference.
∫ Interference from other devices
• This system may not function properly and troubles such as
noise and sound jumps may arise due to radio wave
interference if this system is located too close to other
Bluetooth devices or the devices that use the 2.4 GHz band.
®
• This system may not function properly if radio waves
from a nearby broadcasting station, etc. are too strong.
∫ Intended usage
• This system is for normal, general use only.
• Do not use this system near equipment or in an environment
that is sensitive to radio frequency interference (example:
airports, hospitals, laboratories, etc).

Troubleshooting

Before requesting service, make the following checks.
If you are in doubt about some of the check points, or
if the solutions indicated in the following guide do not
solve the problem, consult your dealer for instructions.
• More detailed operating instructions are available in
"Owner's Manual (PDF format)". (
To return to the factory defaults.
While this system is on, press and hold [Í/I] on this
system for more than 4 sec. (All the indicators will
blink twice when this system is reset.)
For further dedicated help, support and
advice about this system please visit:
https://panasonic.jp/support/global/cs/
(This site is in English only.)
®
®
security features. But
®
device.
®
cover)