Bluetooth ® Operation; Using A Usb Device - Panasonic SC-TMAX45 Operating Instructions Manual

Bluetooth ®
You can connect and play an audio device wirelessly
through Bluetooth .
®
Preparation
• Switch on the unit.
• Switch on the Bluetooth
the device near the system.
• Read the operating instructions of the device for details.
Pairing a device
1
Press [ ].
"PAIRING" is shown.
2
Select "SC-TMAX45" or "SC-TMAX15" from the
Bluetooth ® menu of the device.
If prompted for a passkey, input "0000".
The device connects with this system automatically
after pairing is complete.
Note:
•
If a Bluetooth device is connected, you need to disconnect
®
the device before pairing a new device (~"Disconnecting a
device").
•
You can pair up to 8 devices with this system. If a 9th device
is paired, the device that has been paired for the longest
time will be replaced.
• Depending on the searching functionality of the Bluetooth
device and the surrounding environment, if the product
name is not shown on the Bluetooth
switch off and then switch on the Bluetooth
device repeatedly during the pairing process.
Connecting a device
1
Press [ ].
2
Select "SC-TMAX45" or "SC-TMAX15" from the
Bluetooth menu of the device.
®
3
Start playback on the device.
Note:
•
A device must be paired to connect.
•
When "BLUETOOTH" is selected as the source, this system
will automatically try to connect to the last connected device.
Bluetooth playback
®
Play Press [4/9].
Pause Press [4/9].
Press again to continue playback.
Skip Press [2/3] or [5/6] to skip track.
Search Press and hold [2/3] or [5/6].
Note:
Depending on the Bluetooth
work.
6
6
operation
feature of the device and put
®
menu of the device,
®
feature of the
®
® device, some operations may not
Multi Connect
This system supports Multi Connect, which can connect
up to 2 devices simultaneously.
To switch between the connected devices
When one of the connected devices is playing, you can
easily switch control to another connected device simply
by starting a playback on that device. The previous
playback will be paused automatically.
Note:
This function may not work for some apps or devices
(depending on app or device specifications).
Disconnecting a device
While a Bluetooth
Press and hold [4/9].
"PAIRING" is shown.
Note:
•
This function disconnects all connected devices.
• A device is disconnected when you:
– Select a different source.
–
Move the device out of the maximum range.
–
Disable the Bluetooth
–
Switch off the unit or the device.
Bluetooth standby
®
®
This function automatically switches on the system when
you establish a Bluetooth
Press and hold [
"ON BLUETOOTH STANDBY" is shown.
To cancel, press and hold the button again until "OFF
BLUETOOTH STANDBY" is shown.
Note:
• Some devices may take longer to respond. If you are
connected to a Bluetooth
system, wait for a minimum of 5 seconds before connecting
to this system from your Bluetooth
•
When you disconnect and connect the AC mains lead, the
Bluetooth standby function may not work even though the
®
setting is on. In this case, switch on the unit and check the
Bluetooth ® standby setting.

Using a USB device

Preparation
Before you connect a USB device to the system, make
sure you do a backup of the data.
Decrease the volume and connect the USB device to
the USB port.
Rear view
Hold the unit when connecting or disconnecting the USB
device.
Note:
Do not use a USB extension cable. The system cannot
recognize USB device connected through a cable.
device is connected
®
transmission of the device.
®
® connection from a paired device.
] to switch on this function.
device before switching off the
®
® device again.
USB device
(not supplied)