13.9. Disassembly of SPK SMPS
P.C.B.
• Refer to "Disassembly of Inner Cover Unit".
Step 1 Remove 5 screws.
Step 2 Release the catch and lift up the SPK SMPS Block.
Caution: During assembling, a "click" sound could be
heard when the SPK SMPS Block is attached properly to
the SPK Main P.C.B..
Step 3 Remove 1 screw.
Step 4 Remove AC Jack Holder.
Step 5 Release 2 catches using a screwdriver and gently push
up the SMPS Shield Unit.
Caution: During assembling, ensure that the SMPS Shield
Unit is catched properly to the SMPS bracket as shown.
74