Type: Dual Parameters - Boss GX-100 Parameter Manual

Parameter Value
AUTO OFF, ON
TRIGGER *2
CARRYOVER OFF, ON
* 1 Displays when TYPE is "PAN".
* 2 Displays when TYPE is "REVERSE".

TYPE: DUAL Parameters

Parameter Value
SERIES
PARALLEL
MODE
L/R
MONO
1: TYPE PAN
2: TYPE
ANALOG
TAPE
1 ms–2000
ms,
BPM ŀ–Ō
1: TIME
2: TIME
1: FFEDBACK 0–100
2: FEEDBACK
1: EFFECT 0–120
LEVEL
2: EFFECT
LEVEL
1: HIGH CUT 20.0 Hz–12.5
2: HIGH CUT kHz, FLAT
40–250
BPM
CARRYOVER OFF, ON
If this is "ON," an effect is produced that matches what you're playing.
You can specify whether the effect sound carries over when you switch the DELAY to "OFF".
This is a delay comprising two different delays connected in series.
This is a delay comprising two delays connected in parallel.
This delay lets you specify the L and R channels independently.
This is a simple mono delay.
This delay is specifically for stereo output. This allows you to obtain the tap delay effect that
divides the delay time, then deliver them to L and R channels.
Gives a mild analog delay sound.
This setting provides the characteristic wavering sound of the tape echo.
Adjusts the delay time.
* When set to BPM, the value of each parameter will be set according to the value of the
"MASTER BPM" specified for each memory. This makes it easier to achieve effect sound
settings that match the tempo of the song.
* If, due to the tempo, the time is longer than the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4 of that time.
Adjusts the volume of delay that is returned to the input. Higher settings will result in more delay
repeats.
Adjusts the volume of the delay sound.
Sets the frequency at which the high cut filter begins to take effect. When FLAT is selected, the
high cut filter has no effect.
Adjusts the BPM value for each memory.
* BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
* When you have an external MIDI device connected, the MASTER BPM synchronizes to the
external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting
of the MASTER BPM, set "SYNC CLOCK" to "INTERNAL".
Sets whether to make the sound of the effect carry over or not after you turn it off.
Explanation
Explanation
EFFECTS
41