Boss ME-25 Owner's Manual
Guitar multiple effects
Hide thumbs
Also See for ME-25:
- Owner's manual (104 pages) ,
- Training manual (9 pages) ,
- Turbostart (2 pages)
Related Manuals for Boss ME-25
Summary of Contents for Boss ME-25
- Page 1 Owner’s Manual Bedienungsanleitung Mode d’emploi Manuale dell'utente Manual de instrucciones Manual do proprietário Gebruikershandleiding...
-
Page 2: Making The Connections And Turning The Power On
On the ME-25, the level of the signal input via AUX cannot be adjusted. You’ll need to perform When connection cables with resistors are used, the volume level of equipment that adjustment on the equipment you’ve connected. -
Page 3: Let's Play
Let’s Play! Once you’ve finished making the connections, try playing sounds as you operate the ME-25. Using Pedal Effects Choosing a Sound (Memory) You can use pedal effects to apply wah or a variety of other Switches to the previous memory. -
Page 4: Using The Sound Library
Sound Library. Sounds cannot be added and saved in the Sound Library using the ME-25 itself. Sounds that you like and want to reuse should be saved in memory (Memory Write). When saving the sounds in memory, placing them in the order that you intend to use during the performance will be helpful. -
Page 5: Making Detailed Settings For Effects (Edit Mode)
Making Detailed Settings for Effects (Edit Mode) In Edit mode, you can make detailed settings for all the effects. Hold down [EXIT] and press [WRITE]. “Ed” appears in the display and operation switches to Edit mode. Choose the effect whose settings you want to make. -
Page 6: Effect Guide
All product names mentioned in this document are trademarks or registered trademarks of their respective owners. Those companies are not affiliated with BOSS and have not licensed or authorized BOSS’s ME-25. Their marks are used solely to identify the equipment whose sound is simulated by BOSS’s ME-25. - Page 7 Making Detailed Settings for Effects (Edit Mode) MODULATION These effects broaden, modulate, and/or pitch shift the sound. Explanation 1: CHORUS This effect adds subtle wavering to RATE: DEPTH: E.LEVEL: transform the tone into one that is This sets the speed of the effect This sets the richness of the effect This sets the volume broader, thicker, and more beautiful.
- Page 8 This simulates the reverberations inside a hall. level of the effect. PEDAL FX (Pedal Effects) This produces a variety of effects using the ME-25’s expression pedals. For information on how to use pedal effects, read “Using Pedal Effects” (p. 3). Explanation 1: WAH This is a wah effect.
-
Page 9: Convenient Functions
Convenient Functions Tuning the Guitar (Tuner) Tune so that the desired pitch is displayed and both tuning guide indicators light up. Tuning Guide Too high Too low Tuned (rapid flashing) (rapid flashing) Press the MEMORY pedals at the same time. The tuner is switched off. -
Page 10: Phrase Loop Play
Convenient Functions Phrase Loop Play You can record up to 38 seconds of a performance and play back Hold down the SOLO pedal for two seconds or the recorded section over and over. You can also layer additional longer (STANDBY). performances with the recording as it plays back (overdubbing). -
Page 11: Computer Connection Via Usb
Convenient Functions Computer Connection Via USB Connecting the unit to a computer enables you to manage the sounds on the ME-25 or to use a digital audio workstation (DAW) to record, play back, and edit audio. Installing the USB Driver By using the dedicated driver, you can record, play back, and edit audio with high-quality sound and stable timing, and control the ME-25 using MIDI. -
Page 12: Restoring The Factory Settings (Factory Reset)
Pedal You can restore the settings in the ME-25 (memories, tuner The ME-25’s expression pedal has been set for optimal operation at reference pitch, and knob response method) to the values set when the factory. However, extended use and certain operating the unit was shipped from the factory.