Play Option - Boss GX-100 Parameter Manual

MENU

PLAY OPTION

Here you can specify how the pedals will work during performance.
Parameter Value
WAIT1
BANK MODE
WAIT2
IMMEDIATE
BANK U01–U50
EXTENT MIN P01–P25
BANK U01–U50
EXTENT MAX P01–P25
MONO
LOOP MODE
STEREO
Specifies how the looper operates when you press the pedal.
LOOP REC
RECÓPLAYÓDUB Operation will switch in the order of Recording Ó Playback Ó Overdubbing.
ACTION
RECÓDUBÓPLAY Operation will switch in the order of Recording Ó Overdubbing Ó Playback.
DELETE OFF, ON
WARNING
OVERWRITE OFF, ON
WARNING
120
The memory does not switch simply because the screen display changes, even when you
press the bank pedal to switch banks. At the moment you press the bank pedal, the bank and
number are confirmed, and the unit switches to the next memory.
The display blinks when you press the bank pedal, and you can select a number without
switching banks. At the moment you press the bank pedal, the bank and number are
confirmed, and the unit switches to the next memory. You can switch to a number within the
same bank even when a function besides a number is set for a number pedal. You can also
switch banks by pressing the bank pedal while the display is blinking.
The memory switches instantly when a BANK pedal or any of the number pedals is pressed.
Sets the lower limit for the banks.
Sets the upper limit for the banks.
Mixes the L/R signals for mono operation.
The recording time is 38 seconds.
Operate in stereo.
The recording time is 19 seconds.
Sets whether to show a confirmation message when you try to delete an effect from the effect
chain.
Sets whether to show a confirmation message when you try to overwrite an effect in the effect
chain.
Explanation