Changing Basic Settings; Home Connect - Bosch SMV6HCX02A User Manual

aus Home Connect
Basic setting
Remote Start
Factory setting
1
Factory setting (may vary according to model)
14.2 Changing basic settings
Open the appliance door.
1.
Press ⁠ .
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows
Press
4.
the display shows the required set-
ting.
Press repeatedly until the dis-
5.
play shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
34
Display text Selection
rc1 rc0 - rc2
rE Start with
YES
Confirm with
⁠ .
repeatedly until
Description
Activate or deactivate
→ "Remote Start
Page 35.
The following settings are
possible:
¡ With the setting "rc0", the
function is permanently
deactivated.
¡ With the setting "rc1", the
function can be selected
via the
→ "Activating Remote
Start
¡ With the setting "rc2", the
function is permanently
activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
Page 34
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
Home Connect
15 Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
",
button.
", Page 36