Bosch SMV6HCX02A User Manual page 46

aus Troubleshooting
Fault
Detergent residue in
the appliance
Water marks on
plastic parts.
Wipeable or water-sol-
uble coatings are
present inside the ap-
pliance or on the
door.
Stubborn white coat-
ings are present on
tableware, inside the
appliance or the door.
Tea residue or lipstick
marks on tableware.
46
Cause and troubleshooting
Change your detergent → Page 25.
▶
Due to laws of physics droplet formation on plastic
surfaces is unavoidable. After drying water marks are
visible.
Select a more intensive programme.
▶
Position tableware at an angle.
▶
→ "Arrange tableware", Page 29
Use rinse aid.
▶
→ "Rinse aid", Page 24
Detergent substances are deposited there. These
coatings cannot generally be removed with chemicals.
Change your detergent → Page 25.
▶
Clean the appliance mechanically.
▶
Detergent substances are deposited there. These
coatings cannot generally be removed with chemicals.
Change your detergent → Page 25.
▶
Clean the appliance mechanically.
▶
Too little detergent is being used.
Increase the amount of detergent used or change
▶
Detergent → Page 25.
Washing programme selected too weak.
Select a more intensive washing programme.
▶
Washing temperature is too low.
Select a programme with a higher washing temper-
▶
ature.
Too little detergent is being used or is unsuitable.
Use a suitable Detergent → Page 25 and follow the
▶
manufacturer's instructions for the amount to be
used.
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.