Before Using For The First Time; Making Settings For Initial Start-Up; Rinse Aid System; Rinse Aid - Bosch SMV6HCX02A User Manual

aus first time
first time
9 Before using for the
first time
first time
9.1 Making settings for initial
start-up
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→ "Home Connect quick start",
Page 35
Requirement: The appliance has
been installed and connected.
→ Page 11
Add rinse aid. → Page 24
1.
Switch on the appliance.
2.
→ Page 30
Set the amount of rinse aid to be
3.
dispensed. → Page 25
Add detergent → Page 25.
4.
Start the Programme with the
5.
highest cleaning temperature
→ Page 17 without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip: You can change this setting and
other Basic settings → Page 32 at
any time again.
24
10 Rinse aid system
10.1 Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
Press the catch on the lid of the
1.
dispenser for rinse aid
⁠ .
Add rinse aid up to the max mark.
2.
If rinse aid spills out, remove it
3.
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.
and lift
2
1
max