aus Troubleshooting
Fault
Removable streaks
are present on
glasses, glassware
with a metallic appear-
ance and cutlery.
Irreversible clouding
of glassware.
Rust spots on cutlery. Cutlery is not sufficiently rust-resistant. Knife blades
Detergent residue is
present in the deter-
gent dispenser or the
tablet collecting tray.
Excessive formation of
foam occurs.
48
Cause and troubleshooting
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.
Glasses are not dishwasher-proof, only suitable for
dishwashers.
Use dishwasher-proof glasses.
▶
Glasses are usually only suitable for use in a dish-
washer, i.e. long-term wear or long-term changes
must be expected.
Avoid a lengthy steam phase (standing time after
▶
wash cycle ends).
Use a programme with a lower temperature.
▶
Use detergent with a glass protection component.
▶
are often more severely affected.
Use rust-resistant tableware.
▶
Cutlery may also rust if washed together with rusting
items.
Do not wash rusting items.
▶
Spray arms were blocked by tableware so detergent
was not rinsed out.
Check that the spray arms are not blocked and can
▶
rotate freely.
Detergent dispenser was damp when detergent was
added.
Only add detergent to a detergent dispenser when
▶
dry.
Hand washing-up liquid is present in dispenser for
rinse aid.
Immediately add rinse aid to the dispenser.
▶
→ "Adding rinse aid", Page 24
Rinse aid has been spilled.
Remove the rinse aid with a cloth.
▶
Detergent or appliance care product used causes ex-
cessive foaming.
Change the brand of detergent.
▶