Table of Contents
Advertisement
en Home Connect
Basic setting
Remote Start
Factory setting
1
Factory setting (may vary according to model)
15.2 Changing basic settings
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
→ "Home Connect ", Page 38
Open the appliance door.
1.
Press
.
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows H:xx.
a The display shows
Press
4.
the display shows the required set-
ting.
38
Display text Selection
rc:01
rc:00 - rc:02
rE:
Start with
Y:ES
Confirm with
.
repeatedly until
Description
Activate or deactivate
→ "Remote Start ",
Page 39.
The following settings are
possible:
¡ With the setting "rc:00",
the function is perman-
ently deactivated.
¡ With the setting "rc:01",
the function can be selec-
ted via the
→ "Activating Remote
Start ", Page 39
¡ With the setting "rc:02",
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→ "Home Connect ",
Page 38
Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
Press
or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
Home Connect
16 Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
button.
repeatedly until the
Advertisement
Table of Contents
