ZyXEL Communications LTE4506-M606 User Manual page 52

Router > DHCP Server
Fig ure 31
The following table describes the labels in this screen.
Table 23 Router > DHCP Server
L ABEL DESC RIPT IO N
DHCP Settings
Enable DHCP Server Select the check box to enable the DHCP server on the LTE4506.
Start IP The LTE4506 is pre-configured with a pool of 240 IP addresses starting from 192.168.0.10 to
192.168.0.250.
This field specifies the first of the contiguous addresses in the IP address pool.
End IP This field specifies the last of the contiguous addresses in the IP address pool.
Lease Time (minutes) Specify how long (in minutes) each computer can use the information (especially the IP
address) before it has to request the information again.
Static DHCP List
Add New Click
This field displays the index number of the static IP address entry.
IP Address This field displays the IP address that the LTE4506 assigns to a device with the entry's MAC
address.
MAC Address This field displays the MAC address of the device to which the LTE4506 assigns the entry's IP
address.
Action Click
Click
Apply Click this button to save your changes back to the LTE4506.
Reset Click
Chapter 6 Router
to create a new entry.
Add Ne w
to go to the screen where you can edit the static IP address.
Edit
to remove the static IP address entry.
De le te
to reload the previous configuration for this screen.
Re se t
LTE4506 User's Guide
52