Table of Contents
Advertisement
Turning error tones on and off
About this task
Use this procedure to activate the error tone alarm when you perform an incorrect action while
using the phone.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Use the Down Arrow key to go to the Error tones screen.
5. Press Toggle to turn error tones on or off.
6. Press Save.
Enabling wireless headset bidirectional signaling
Before you begin
Check if the headset supports electronic hook switch (EHS) signaling.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Scroll to Headset signaling.
5. Press Toggle to select one of the following options:
• Disabled: Disables signaling from the phone to the headset.
• Switch hook and alert: Activates the link to the headset if you press Headset. When
the phone receives an incoming call you hear the alert tone in the headset.
• Switch hook only: Activates the link to the headset if you press Headset. When the
phone receives an incoming call you do not hear the alert tone in the headset.
6. Press Save.
Configuring hearing aid compatibility
Procedure
1. Press the Main menu.
December 2021
Using Avaya J139 SIP IP Phone in Open SIP
Comments on this document? infodev@avaya.com
Audio
119
Advertisement
Table of Contents
