Intake Restrictor Adjustment - Lopi 864 TRV 31K CleanFace Manual

26 Finalizing the Installation

Intake Restrictor Adjustment

The intake restrictor is located on the back wall of the firebox. To adjust the restrictor, follow the steps
below:
© Travis Industries
(for qualified installers only)
Loosen the two screws
holding the intake
restrictor in place..
Position # 1 (open)
Slide the restrictor down
to the second position
and tighten the screws.
Position # 3 (not used)
Position # 2
6/27/2019 - 1500 864 31K CF Aust