Table of Contents
Advertisement
Finalizing the Installation
Converting the Fireplace to Rear Vent (continued)
Bend the heat shield legs
downward as shown.
Remove the screws from the
top of the fireplace. Attach
the heat shield to the top of
the fireplace using these
screws.
© Travis Industries
(for qualified installers only)
Tuck the 3 pieces of insulation (included in the
rear vent conversion kit) into the area above the
exhaust manifold. The insulation must be placed
so it covers the entire area over the flue
assembly.
Attach the intake cover plate to
the top of the fireplace using the
screws removed earlier.
6/27/2019 - 1500
Attach the vent cover plate to the
back of the fireplace using the
screws removed earlier.
9
864 31K CF Aust
Advertisement
Table of Contents
