Mitsubishi Electric PURY-M200YNW-A1 Service Handbook page 413

[8-15 Main-HBC Maintenance Instructions ]
Operation procedures
2) Use wrench S14 to loosen the hexagonal nut (part 25) and remove it
and the spring washer (part 24).
3) Remove the water inlet body (part 1).
4) Remove four pull rods (part 11).
Not all four rods do not need to be removed unless necessary to re-
place the parts.
5) Remove the rotation sign.
<<Note>>
Save the label for reuse in the way its adhesive quality is maintained.
146
- chapter 8
Illustrations
Spring washer
Rod
Rotation sign label
Hexagonal nut
Water inlet
BS_08_L