Mitsubishi Electric PURY-M200YNW-A1 Service Handbook page 342

[8-13 Parts Replacement Instructions (Outdoor Unit) ]
(3) XL-module
Fix the wires in place with
cable straps.
<HIGH VOLTAGE WIRE>
Fix the wires in place with cable
straps.
<HIGH VOLTAGE WIRE>
<FAN MOTOR WIRE (RIGHT)
(HIGH VOLTAGE)>
Fix the wires in place with
cable straps.
<HIGH VOLTAGE WIRE>
LEFT VIEW
BS_08_L
FRONT VIEW
CONTROL BOX
Fix the wires in place to leave no space between the rubber bushes and the wires.
Fix the wires in place to leave no space between the notches on the rubber
bushes and the wires.
PILLAR C
CONTROL BOX
Fix the wires in place
with cable straps.
<HIGH VOLTAGE
WIRE (21S4a,
21S4c, SV1a, SV2>
Fix the wires in place
with cable straps.
<SENSOR WIRE
(TH4, 5, 7, 15)>
Fix the wires in place
with cable straps.
<COMP WIRE
(HIGH VOLTAGE)>
BOTTOM VIEW
CONTROL BOX
Fix the wires in place with
cable straps.
<SENSOR WIRE>
<LEV WIRE>
Bundle excess wiring inside the
control box, and fix it in place with a
cable tie.
<SENSOR WIRE>
<LEV WIRE>
Clamp the wires in place.
<SENSOR WIRE>
<LEV WIRE>
LEFT VIEW
CONTROL BOX
Clamp the wires in place.
<COMP WIRE (HIGH VOLTAGE)>
Thread the wire through the rubber
bush.
<COMP WIRE (HIGH VOLTAGE)>
Fix the wires in place with
cable straps.
<HIGH VOLTAGE (21S4a,
21S4b, 21S4c, SV1a, SV2,
63H>
Fix the wires in place with
cable straps.
<63HS WIRE>
Fix the wires in place with
cable straps.
<HIGH VOLTAGE WIRE>
Fix the wires in place with
cable straps.
<FAN MOTOR WIRE
(HIGH VOLTAGE)>
Fix the wires in place with
cable straps.
<SENSOR WIRE>
<LEV WIRE>
75
chapter 8 -