Transmitter Operating Controls - Worcester DT10RF Instruction Manual

All manuals and user guides at all-guides.com
1
SET? SELECT
YES
SET? SELECT
YES
2
SET? SELECT
YES
3
FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
DT10RF PROGRAMMER & DT10RF OPTIMISING PROGRAMMER
8-716-106-652 issue c (01.05) UK
TRANSMITTER
OPERATING CONTROLS
To select a pre-set CH program:
1 Press the 'SELECT' button to
change to the program to suit your
requirements as follows:
Normal running (all pre-set times and
temperatures)
1 Continuous '1' first temperature
Continuous 'night' temperature
The flame symbol indicates:
Flame on = heating demand ON
Flame off = heating demand OFF
Flame flashing = energy saving for
Optimiser only
To change the room temperature:
Note: the following only occurs during
a timed on period and has no effect
when the receiver is in an off setting.
2 To increase the room temperature:
press the '+' button until the required
temperature is displayed
3 To decrease the room temperature:
press the '-' button until the flame
symbol is no longer displayed
After 5 seconds the display reverts
back to the actual room temperature.
Optimium start (Digistat Optimiser
only):
This unit features an energy saving
system which, during milder weather,
automatically delays the first start up
of the day from 0 to 60 minutes
depending on:
• actual room temperature at the first
switch on time only
• set temperature at the first switch on
• how fast the heating system
responded on the previous day
Press the '+' button once only to
override a delayed start.
TRANSMITTER
OPERATING CONTROLS
7