Setting Individual Weekdays - Worcester DT10RF Instruction Manual

All manuals and user guides at all-guides.com
1
2
3 3
4
5 5
6
3rd HW OFF
FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
DT10RF PROGRAMMER & DT10RF OPTIMISING PROGRAMMER
8-716-106-652 issue c (01.05) UK
RECEIVER
SETTING PROGRAMS

Setting individual weekdays:

Note: if you do not require individual
weekday times, then press ‘set?’ until
‘SET’ SAT-SUN are displayed and
continue on the next page.
If you do not wish to change the
settings for the day displayed, then
press 'set?' until the first day you
want to change is displayed
1 Press 'OK' to select weekday
2 Press 'OK' to select 1st ON time
Note: speed up the display by holding
down the ‘+’ or ‘-’ buttons.
3 Press ‘+’ or ‘-’ to change the ON
time
4 Press ‘set?’ to set the ON time and
select the OFF time
5 Press ‘+’ or ‘-’ to change the OFF
time
6 Press ‘set?’ to set the OFF time and
select the next ON time
Repeat operations 3 to 6 to set the
2nd and 3rd ON/OFF times.
Note: after pressing ‘set?’ for the 3rd
OFF time ‘SET’ and the next weekday
are displayed shown . . . after
completing the steps above for FRI
the display shows ‘SET’ SAT SUN
(see next page)
RECEIVER
SETTING PROGRAMS
15