Receiver Pre-Set Programs - Worcester DT10RF Instruction Manual

All manuals and user guides at all-guides.com
1st 1st 2nd 2nd
ON OFF ON OFF
Hot Water:
MON to FRI:
Time 6:30 8:30 12:00 12:00 16:30 22:30
SAT & SUN:
Time 7:00 9:00 12:00 12:00 16:00 23:00
FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
DT10RF PROGRAMMER & DT10RF OPTIMISING PROGRAMMER
8-716-106-652 issue c (01.05) UK
RECEIVER
PRE-SET PROGRAMS
Note: The clock time is pre-
programmed and should not
require adjustment.
if you need to restore the factory
pre-set program times then:
Press the '-' and '+' buttons together
to restore the default program times
to those shown in the table opposite.
The default ON/OFF periods pre-
programmed for DHW are shown in
the table opposite.
Note: two ON/OFF periods can be
used instead of 3 by setting the 2nd
ON & OFF periods to 12.00 as
shown in the default program table.
3rd 3rd
One ON/OFF period can be
ON OFF
achieved by setting the 2nd and 3rd
ON & OFF periods to the same time.
See 'RECEIVER SETTING
PROGRAMS' in the USER
INSTRUCTIONS section if changes
are required to the clock time or pre-
programmed settings.
PRE-SET PROGRAMS
13
RECEIVER