Receiver Setting The Clock - Worcester DT10RF Instruction Manual

All manuals and user guides at all-guides.com
1
2
3 3
4
5 5
6
7 7
8
FITTING & OPERATING INSTRUCTIONS FOR WORCESTER BOSCH
DT10RF PROGRAMMER & DT10RF OPTIMISING PROGRAMMER
8-716-106-652 issue c (01.05) UK
RECEIVER
SETTING THE CLOCK
1 Press the 'set?' button until ‘SET’ &
'CLOCK?' are shown in the display
2 Press 'OK' displays '24hr' & 'ON'
3 Press ‘+’ to toggle between 24hr
and 12hr display
4 Press 'set?' to set the clock and the
hours flash on the display
5 Press ‘+’ or ‘-’ to correct hour
Note: speed up the display by holding
down the ‘+’ or ‘-’ buttons.
6 Press the ‘set?’ button to set the
correct hour and the minutes flash
7 Press ‘+’ or ‘-’ to correct minutes
8 Press the ‘set?’ button to set the
correct minutes. ‘SET’ & ‘DATE?’
appears in the display.
Note: if the day displayed is incorrect
the date needs resetting. To change
the date see ‘SETTING THE DATE’.
If you do not wish to change the date,
press ‘set?’ to return to normal display.
RECEIVER
SETTING THE CLOCK
19