Milwaukee M18 HOSALC Operator's Manual

Milwaukee M18 HOSALC Operator's Manual

High output stand area light/charger
Hide thumbs Also See for M18 HOSALC:

Advertisement

Quick Links

OPERATOR'S MANUAL
Cat. No.
M18 HOSALC
M18™ HIGH OUTPUT STAND AREA LIGHT/CHARGER
WARNING
To reduce the risk of injury, user must read and understand operator's manual.

Advertisement

Table of Contents
loading

Summary of Contents for Milwaukee M18 HOSALC

  • Page 1 OPERATOR'S MANUAL Cat. No. M18 HOSALC M18™ HIGH OUTPUT STAND AREA LIGHT/CHARGER WARNING To reduce the risk of injury, user must read and understand operator's manual.
  • Page 2: Important Safety Instructions

    Do not unplug by pulling on the cord. To unplug, charge MILWAUKEE Lithium-Ion ® grasp the plug, not the cord. packs only in their MILWAUKEE Lithium-Ion ® • Unplug the cord from outlet when not in use and charger. Other types of batteries may burst before servicing or cleaning.
  • Page 3: Specific Safety Rules

    If the external flexible cable or cord of this S PECIFICATIONS luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent Cat. No..........M18 HOSALC or similar qualified person in order to avoid a hazard. DC Input Volts..........18V DC •...
  • Page 4 SYMBOLOGY ASSEMBLY Recharge only with the charger WARNING Safety alert manual supplied with your charger and battery. Volts Inserting/Removing Battery Pack Insert the battery pack by sliding battery pack into Direct Current the battery bay. Insert the battery pack until the bat- tery latches lock.
  • Page 5: Light Operation

    As with other battery pack types, permanent capacity loss can result if the pack is stored for long periods of time at high temperatures (over 50°C). MILWAUKEE ® Lithium-Ion battery packs maintain their charge NOTE: If the Fuel Gauge doesn't appear to be during storage longer than other battery pack types.
  • Page 6: Charger Operation

    If the light indicator flashes red and green, check that the battery pack is fully seated into the bay. Remove the pack and reinsert. If the problem OPERATION persists, contact a MILWAUKEE service facility. ® • If the light indicator does not come on, check that the battery pack is fully seated into the bay.
  • Page 7 ACCESSORIES Use only recommended accesso- WARNING ries. Others may be hazardous. For a complete listing of accessories, go online to milwaukeetool.com.au / milwaukeetool.co.nz or contact a distributor.
  • Page 8 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...

Table of Contents