3. CAUTION
3.1. SAFETY PRECAUTIONS
1. Before servicing, unplug the power cord to prevent an electrical shock.
2. When replacing parts, use only manufacturer's recommended
components for safety.
3. Check the condition of power cord. Replace if wear or damage is
evident.
4. After servicing, be sure to restore the lead dress, insulation barriers,
insulation papers, shields, etc.
5. Before returning the serviced equipment to the customer, make the
following insulation resistance test to prevent a shock hazard.
3.2. BATTERY CAUTION
Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries according to following caution:
Disposal or transportation of lithium batteries should be performed by permitted, in accordance with
federal, state and local guidelines.
A battery continues to have no transportation limitations as long as it is separated to prevent short
circuits and packed in strong packaging.
Commercial firms that dispose of any quantity of lithium cells should have a mechanism in place to
account for their ultimate disposition. This is a good practice for all types of commercial or industrial
waste.
When the lithium battery is exchanged, the clock settings are cleared. In this case, make clock settings
again.
Recommend Type Number:
BR12251VC (BAT1) Manufactured by MATSUSHITA
3.3. TRADEMARKS
- Netscape and Netscape Navigator are registered trademarks of
Netscape Communications Corporation in the U.S. and other countries.
- Adobe and Acrobat are either registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other
countries.
- Ethernet is a registered trademark of Xerox Corporation in the United
States and/or other countries.
7