Table of Contents
Advertisement
PRECAUTIONS
Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or
cover. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
Handle the camera with care.
Do not abuse the camera. Avoid striking or shaking
it.
The camera could be damaged by improper
handling or storage.
Do not expose the camera to rain or moisture, or
try to operate it in wet areas.
Do take immediate action if ever the camera do
becomes wet. Turn power off and refer servicing to
qualified service personnel. Moisture can damage
the camera and also create the danger of electric
shock.
•
Never face the camera toward the sun.
Whether the camera is in use or not, never face it
toward the sun. Do use caution when operating the
camera in the vicinity of spot lights or other bright
lights and light reflecting objects.
•
Do
not
operate
the
camera
beyond
its
temperature, humidity or power source ratings.
Do not use the camera in an extreme environment
where high temperature or high humidity exist. Use
the camera under conditions where temperatures
are within -22°F - 122°F (-30°C - +50°C), and
humidity is below 90%. The input power source is
120V AC 60 Hz for WV-BP100 or 24V AC 60 Hz for
WV-BP104.
Caution:
To prevent fire or shock hazard, the UL listed wire
VW-1, style 1007 should be used for the cable for
AC 24V Input Terminal.
-3
-
Advertisement
Table of Contents
