Network Camera Setting; Mounting On The Table - Panasonic BB-HCM381A Service Manual

7.3. NETWORK CAMERA SETTING
To access the network camera from a PC under the 6.2. CONNECTING THE NETWORK CAMERA, it is
required to make the network settings of the PC consistent with those of the network camera.
Using the setup CD-ROM, search the information from the PC about the network settings of the network
camera. Make the settings (IP address and subnet mask) of the network camera consistent with those
of the PC.
- Do not select establish the DHCP and DDNS about settings of the
network camera and PC.
For more detailed information, refer to the Operating Instructions.
8. MOUNTING
Two ways of mounting are shown in the following figures. MAC Address and Serial Number are
indicated on the bottom label of the main unit of the Network Camera. Please record both of them on the
Network Camera Memo on Operating Instruction. They are indispensable for setting network
parameters after mounting the Network Camera and for future customer servicing.
8.1. MOUNTING ON THE TABLE
Mount the Network Camera at an even place where vibrations etc. are few.
17