Installing the system fan
1. Align the system fan with screw holders on the system board.
2. Replace the M2.0 x 3.0 screws to secure the system fan to the system board.
3. Connect the system fan cable to the system board.
4. Install the:
a.
display panel
NOTE:
uSIM card is installed only on tablets shipping with WWAN module.
b.
uSIM/microSD card
5. Follow the procedure in
Heat sink
Removing heat sink assembly
1. Follow the procedure in
2. Remove the:
a.
Micro-SIM and/or microSD card
NOTE:
Micro-SIM card slot is available only on tablets shipping with WWAN module.
b.
Display panel
26
Using your tablet
After working inside your
Before working inside your
tablet.
tablet.