Installing the battery
1. Insert the battery into the slot on the tablet.
2. Replace the M2.0 x 4.0 screws to secure the battery to the tablet.
3. Install the:
a.
display panel
b.
uSIM/microSD card
NOTE:
uSIM card is installed only on tablets shipping with WWAN module.
4. Follow the procedure in
System fan
Removing the system fan
1. Follow the procedure in
2. Remove the:
a.
uSIM/microSD card
NOTE:
Micro-SIM card slot is available only on tablets shipped with WWAN module.
b.
Display panel
3. To remove the system fan:
a. Disconnect the system fan cable from the system board [1].
b. Remove the M2.0 x 4.0 screws that secure the system fan [2].
c. Lift the system fan from the tablet [3].
After working inside your
Before working inside your
tablet.
tablet.
Using your tablet
25