Dell Latitude 5285 Owner's Manual page 27

Hide thumbs Also See for Latitude 5285:

Table of Contents

3. To remove the heat sink assembly:

a. Peel the conductive tapes that secure the shielding cover [1].

NOTE:

Ensure to peel off the tape carefully, as any damage to the tape will need to raise a new order for conductive

tapes. The tape secures the IR camera cable from any damage. Ensure to fix the tapes while installing or replacing

the component. Gently remove the 4 conductive tapes, so that the conductive tapes can be reused.

b. Lift the shielding covers that secure the heat sink assembly [2,3].

NOTE:

Peel the black tape / copper tape that secure the IR camera cable for model shipped with IR camera

(optional).

4. To remove the heat sink assembly:

a. Loosen the M2.0 x 2.5 captive screws that secure the heat sink assembly to the tablet [1].

NOTE:

Remove the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heat sink.

b. Lift the heat sink assembly from the tablet [2].

Using your tablet

Table of Contents

T17g