Table of Contents
Advertisement
Video screen options
Option
Description
Display
Allows you to set the display brightness depending up on the power source—On Battery and On AC. The
Brightness(LCD
display brightness is independent for battery and AC adapter. It can be set using the slider.
Brightness)
Security screen options
Option
Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password.
Default setting: Not set
System
Allows you to set, change, or delete the system password.
Password
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password
Allows you to specify the minimum and max password lengths of the Administrator and System
Configuration
passwords.
● min-4—by default, if you want to change you can increase the number
● max-32—you can decrease the number
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password,
when they are set. The options are:
● Disabled
● Reboot bypass
Default setting: Disabled
Password
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin
Change
password is set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup
Allows you to determine whether changes to the setup options are allowed when an Administrator
Changes
Password is set. If disabled the setup options are locked by the admin password.
Option "allow wireless switch changes" is not selected by default.
UEFI capsule
This option controls whether the system allows BIOS updates using UEFI capsule update packages. This
firmware updates
option is enabled by default
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
● TPM On—enabled by default
● Clear
● PPI Bypass for Enable Commands—disabled by default
● PPI Bypass for Disabled Commands
● Attestation enable—enabled by default
● Key storage enable—enabled by default
52
System setup
NOTE:
You must set the admin password before you set the system or hard drive password. Deleting
the admin password automatically deletes the system password and the hard drive password.
NOTE:
Successful password changes take effect immediately.
NOTE:
Successful password changes take effect immediately.
NOTE:
If Strong Password is enabled, the Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
Advertisement
Table of Contents
