Nav/Com Page - Garmin GPS 500 Pilot's Manual & Reference

2.7 NAV/COM PAGE

The NAV/COM (navigation communications) Page
(Figure 2-42) provides a list of the airport communication
and navigation frequencies at the departure, enroute, and
arrival airports. The NAV/COM Page makes display of
the frequencies needed along the flight plan quick and
convenient. If there is no active flight plan with a departure
airport, the NAV/COM Page displays the frequencies for
the airport nearest the departure position.
Departure, Enroute,
or Arrival Airport
Frequency
Type
Number of Pages in
Current
Current Page Group
Page Group
Figure 2-42 NAV/COM Page
NOTE: The NAV/COM Page may be the fourth or
fifth page in the NAV Page Group when the GPS
500 installation includes connection to traffic
and/or weather information sources. See the
400/500 Series Display Interfaces Pilot's Guide
Document (190-00140-10) or Section 12 of this
manual for more information
190-00181-60 Rev. G
Assigned Frequency and
Usage Information
(when applicable)
Position of
Current Page
within Current
Page Group
GPS 500 Pilot's Guide and Reference
Selecting a frequency list for a departure,
enroute or arrival airport:
Press the small right knob to activate the
1)
cursor.
2) Turn the large right knob to place the cursor
on the airport identifier field (top line on the
NAV/COM Page, see Figure 2-42).
Turn the small right knob to select the desired
3)
airport (Figure 2-43) and press the ENT Key.
Figure 2-43 Airport Window
SECTION 2
NAV PAGES
2-21