Garmin GPS 500 Pilot's Manual & Reference page 53

Selecting a Destination from the Active Flight
Plan
When navigating an active flight plan, any waypoint
contained in the flight plan may be selected as a direct-to
destination from the Select Direct-to Waypoint Page. See
Section 4, for more information on flight plans.
Selecting a direct-to destination from the
active flight plan:
1) Press the Direct-to Key. The Select Direct-to
Waypoint Page appears, with the waypoint
identifier field highlighted.
Turn the large right knob to highlight the flight
2)
plan (FPL) field (Figure 3-7).
Figure 3-7 Highlighted Flight Plan Field
3) Turn the small right knob to display a window
showing all waypoints in the active flight plan
(Figure 3-8).
190-00181-60 Rev. G
4)
5)
GPS 500 Pilot's Guide and Reference
DIRECT-TO NAVIGATION
Figure 3-8 FPL (Flight Plan) Window
Continue turning the small right knob to
scroll through the list and highlight the desired
waypoint.
Press the ENT Key to confirm the selected
waypoint, and press the ENT Key again to
activate the direct-to function.
SECTION 3
3-3