Garmin GPS 500 Pilot's Manual & Reference page 116

SECTION 6
WPT PAGES
User waypoints may only be selected by name
(identifier), as described in Section 6.1.
Creating User Waypoints
User waypoints may be created from the User
Waypoint Page or the Map Page. To create a new user
waypoint, simply enter its name (identifier) and position,
or reference another waypoint by radial and distance.
Creating a new user waypoint by entering
its latitude/longitude position:
1) With the User Waypoint Page displayed, press
the small right knob to activate the cursor.
2) Use the small and large right knobs to enter a
name for the new waypoint (Figure 6-35) and
press the ENT Key. The present position appears
in the position field at the bottom of the page.
To create a waypoint at the present position,
turn the large right knob to highlight 'Create?'
and skip to step 6.
Figure 6-35 User Waypoint Name Field Selected
3) Turn the large right knob to highlight the
position field at the bottom of the page.
6-18
4)
5)
6)
7)
Creating a new user waypoint by
referencing an existing waypoint:
1)
2)
3)
GPS 500 Pilot's Guide and Reference
Use the small and large right knobs to enter
the position coordinates for the new waypoint
(Figure 6-36).
Figure 6-36 Present Position Field Selected
Press the ENT Key to accept the selected
position.
The cursor moves to 'Create?'. Press the ENT
Key to add the new waypoint to memory.
Press the small right knob to remove the
flashing cursor.
With the User Waypoint Page displayed, press
the small right knob to activate the cursor.
Use the small and large right knobs to enter
a name for the new waypoint and press the
ENT Key.
Turn the large right knob to highlight the first
reference waypoint (REF WPT) field (Figure 6-
37).
190-00181-60 Rev. G