Wiring Inside Power Supply Unit Psu-012 (Option) - Furuno DRS4A Installation Manual

2.4 Wiring inside Power Supply Unit PSU-012
(Option)
1. Detach the body cover by hand.
2. Loosen six pan head screws (M3x8) and slide the shield cover upward to remove it.
3. Unfasten two pan head screws (M4x12) to remove the cable clamp.
Pan head screw
(M4x12, 2 pcs.)
Cable clamp
4. Connect the cable VL3P-VV-S2X2C-AA050 (supplied) to the power connector in the PSU-
012.
Put the cable VL3P-VV-S2X2C-AA050 here at the shield part.
5. Remount the cable clamp, shield cover and body cover in that order.
6. Connect other cables.
For black wire
For white wire
Pan head screw
(M3x8, 6 pcs.)
21
Body cover
Shield cover