Furuno DRS4A Installation Manual page 24

5. Attach the LAN cable of the two-way cable to the LAN terminal in the radar sensor.
6. Refer to the illustration shown below, and attach the gasket to the two-way cable, inserting the
cable into the slits on the gasket.
Fix the power cable at the foil part
with this cable clamp.
Power cable
LAN cable
LAN terminal
DRS4A/6A/12A
Fix the power cable at the copper
foil part with this cable clamp.
Gasket
LAN cable
Blue
Red
LAN terminal
White
Black
RF unit
Power terminal
Black
Power cable
DRS25A
17
Power terminal
White