Wiring Inside Power Supply Unit Psu-013 (For Drs25A) - Furuno DRS4A Installation Manual

2.3 Wiring of Power Supply Unit PSU-013 (for
DRS25A)
1. Detach the body cover by hand.
2. Loosen six pan head screws (M3x8) and slide the shield cover upward to remove it.
3. Unfasten four pan head screws (M14x10) to remove two cable clamps.
Pan head screws
(M4x10, 4 pcs.)
Cable clamps
4. Connect the cable VL3P-VV-S2X2C-AA50 and MOD-ASW0002 cables (supplied) to appropri-
ate connectors in the power supply unit as shown below.
5. Remove two cable clamps, shield cover and body cover in that order.
6. Connect other cables.
White
VL3P-VV-S2X2C-AA50 cable
20
Shield cover
Pan head screws
(M3x8, 6 pcs.)
1: Red
2: N. C.
Black
MOD-ASW0002 cable
(Power)
Body cover
3: Blue
2: Black
1: White