Mounting; Equipment List; Mounting Procedure - Furuno IF-NMEASC Operator's Manual

1.

MOUNTING

1.1

Equipment List

Name
Interface Unit IF-NMEASC
Installation CP20-03001
Materials
Spare Parts SP20-01301
1.2

Mounting Procedure

When choosing a mounting location for the unit, keep the following points in mind:
• Select a location where shock and vibration are minimal.
• Locate the unit away from places subject to rain or water splash.
• Keep the unit away from exhaust pipes and vents.
• Locate the unit out of direct sunlight because of heat that can build up inside its cabinet.
• The location should be well ventilated.
• Observe the maintenance space mentioned in the outline drawing at the back of this manual
and the compass safe distances in the safety instructions.
• Fix the unit with four φ3x10 self-tapping screws (supplied).
FIXING HOLES
φ
2- 4
FIXING HOLES
Type Code No.
-
001-023-400
001-019-800
4
207±0.5
Qty
1
1 set • Cable ties (CN-150N, 12 pcs.)
• Self-tapping screws (φ3x10, 4 pcs.)
1 set Fuse FGMB 125V 2A (3 pcs.)
# Minimum recommended
maintenance space
1
Remarks
56